Skip to main content
All CollectionsTroubleshooting
Sensor accuracy during the first 24 hours
Sensor accuracy during the first 24 hours

Having odd readings or no readings at all? Read this to troubleshoot

Tia avatar
Written by Tia
Updated over a week ago

If you recently applied a new sensor, it may take up to 24-48 hours for the sensor to fully calibrate. While the sensor will begin reading your glucose immediately after the 1-hour calibration period is done, it can sometimes take a little longer for the readings to settle into your average range. For this reason, we suggest applying the sensor toward the end of the day, just a few hours before you go to sleep.

When scanning the sensor, make sure to hold the correct part of your phone up to the sensor. Depending on your phone model, the NFC connection is on the top (iOS), or somewhere on the back of the phone (most Android models).

If the readings are still going haywire after 2 days, please contact the Veri support staff. You

Did this answer your question?